Welcome to Sanicare.com
Note: This product has been discontinued. Please refer to comparable bidet called BB1000.
At Sanicare, we have made this an easy Two Step process. If you have any questions, please don't hesitate to give us a call at 800-878-4791.
First, you have to determine whether you have a 1-piece or 2-piece toilet. A 1-piece toilet, as shown below, is a toilet tank and bowl cast during the manufacutring process as one seamless unit. The result is a sleek toilet with no crevices between the tank and bowl. A 2-piece toilet has a separate tank and bowl that are bolted together upon installation.
are restrictions on the type of bidets that will fit these toilets, so to
be sure we suggest you call or email us with your make and model. If
you're unable to find the model number, please call us at 800-878-4791 for
all bidet seats we carry will fit all 2-piece toilets.
This step shows you how to measure your toilet to determinie if it's a round or an elongated size.
Measuring the clearance between the bidet seat and the toilet tank:
Measure the distance from the front of the water tank to the center of dotted line 'B' as shown below. There must be at least 1.75 inches (or more) of clearance for the bidet seat to mount properly.
In the unlikely event that your measurement is less that 1.75 inches, the please call us at 800-878-4791 so we can discuss the make and model of your toilet.
Measuring the length of your toilet bowl:
All our bidet seats come in two sizes: Round or Elongated.
Wacortec-USA products are backed by some of the most comprehensive
warranties in the industry. Hyundai Wacortec-USA warrants that all
products (excluding consumable items) shall be free from defects in material
and workmanship under normal use and service.
period 1 year from original purchase date for all Hyundai
Wacortec products. Warranties may not apply to products that are used for
heavy commercial, hospital, or other high use non-residential application.
100, 300, 1100, 1200, 1500 Models:
Three-Year Limited Warranty
1. Hyundai Wacortec
warrants its products to be free from manufacturing defects under normal use and
service. This warranty is extended only to the ORIGINAL PURCHASER.
2. Hyundai Wacortec-USA's
obligations under this warranty are limited to repairs or replacement,
at Hyundai Wacortec-USA's option, of products or parts found to be
defective, provided that such products were properly installed and used in
accordance with instructions. Hyundai Wacortec reserves the right to make
such inspections as may be necessary in order to determine the cause of the
defect. Hyundai Wacortec will not charge for labor or parts in connection
with warranty repairs for the first full year from date of purchase on all
products except those that may be subject to commercial use limitations.
3. Hyundai Wacortec
is not responsible for the cost of removal, return (shipping) and/or
reinstallation of products. This warranty does NOT apply to:
4. This warranty gives you
specific legal rights. You may have other rights which vary from state to